Skip to content

Framework Laptop 13 Pro Intel® Core™ Ultra Series 3 — BIOS 3.04

FileRelease Date
Windows BIOS v3.04 Installer2026-11-02Framework_Laptop_13_Intel_Core_Ultra_S3_BIOS_3.04.exeSHA256 · 5EB4318950E6C2E629DC17CE36DAD61D24C6BE48A77C9014EF70677EF5F45DCD
Windows Driver Bundle v1.012026-06-05Framework_Laptop_13_Intel_Core_Ultra_Series3_driver_bundle_W11_v101_2026_06_05.exeSHA256 · 32574368FCDA5FF3A6A9F64A1C2F593962CD4489E6393EE2AEBAA6097949BADF
Wi-Fi Driver for use during Windows Installation2026-09-03Framework_W11_OOBE_Wifi_Driver_Package.zipSHA256 · BD427CC233BAAA7CC8522823603390A50FA425BC302D2192CB7900017B5BD044
EFI Shell Update (BIOS v3.04)2026-11-02Framework_Laptop_13_Intel_Core_Ultra_S3_BIOS_3.04_EFI.zipSHA256 · 05670C849D83990D2D725589FF937F7EA3CA21DE0D36564116245D3B737651ED
3.04
Released 2026-11-02·12.3 MB
Stable
Latest
Highlights
  • Update PD firmware to 1.0.0.B.
  • Updated Secure Boot screen prompt behavior when an unsigned Linux boot media is detected.
  • Updated Power Limit tables and raised Psys Max threshold to 218W.
  • Integrated checksum validation into the BIOS Crisis Recovery flow.
  • Standardized F1–F12 function key handling to ignore Fn-Lock settings during BIOS POST phase.
  • Fixed CPU throttling bug where core frequency remains stuck at LFM (400 MHz).
  • Fixed DP Alt Mode fallback negotiation for link partners rejecting SVDM 2.1 protocol structures (PD 1.0.0.B).
  • Fixed restricted BIOS boot paths when the "USB Boot" policy is set to Disabled.
  • Resolved an issue where corrupted or malformed PD payload data caused the EC to crash.

This BIOS update is a bundle of updates to multiple embedded components in the system. Not all of them use the same version number.

ComponentVersion
ECec_304_34ebc93
Updated
PD1.0.0B
Updated
Intel21.0.6.1503
Intel GOP26.0.63
Intel RC4103.01
MicrocodePantherLake-H(0xC06C1 & 0xC06C3) 0x11A
Insyde Kernel05.72.06.0028
DriverVersion
Intel Chipset10.1.20490.8818
Intel Management Engine Consumer2613.9.28.0
Intel Silicon Security Engine Interface2543.9.0.0
Intel Serial IO30.100.2534.18
Intel Graphics32.0.101.8628
HSA_Intel Graphics Software26.8.2209.3
Intel NPU32.0.100.4724
Intel Dynamic Tuning Technology9.1.10009.1745
Intel Smart Sound Technology20.43.12634.0
Realtek Audio6.0.9989.1
HSA_Realtek Audio Console1.53.394.0
Intel PROSet WiFi24.30.0.3
Intel PROSet Bluetooth24.30.1.1
Intel Platform Monitoring Technology7.3.11.3
Intel PPM Provisioning1.0.00000.222
Goodix Fingerprint3.12804.1.290
Realtek Camera BT70910.0.22000.20402
Realtek MEP Opt-in10.0.22000.10004
MEP3.0.6
Dolby3.30904.943.0
HSA_Dolby Access OEM3.27.9710.0
HSA_Dolby Settings3.31000.39.0
Framework EC0.0.0.6

You can check your current BIOS version following the steps here to determine if you are on the latest release.

Framework firmware is published to LVFS and updates via fwupd, which ships by default on most modern distributions.

Terminal window
fwupdmgr refresh --force
fwupdmgr get-updates
fwupdmgr update
  1. Download the Framework Laptop 13 Intel Core Ultra Series 3 BIOS 3.04 Windows Installer.
  2. Run the .exe and click "Yes" when prompted to reboot.
  3. Wait for the firmware progress bar to complete — the system will reboot automatically. Do not interrupt.
  4. Download and install the Windows Driver Bundle v1.01 for your system if you are currently using a previous Driver Bundle release, or you are installing the Driver Bundle for the first time.

Windows Retimer Updates

Updating the retimer will update to a signed retimer firmware that is Thunderbolt certified. There is no change to port functionality if you do not choose to update your retimer firmware. To perform the retimer update, you will need to follow the instructions twice using the following executable files, as there are two sets of retimers on the system, and each pair needs to be updated separately.

Framework_Laptop_13_Intel_Core_Ultra_S3_Retimer01_534530.exe
Framework_Laptop_13_Intel_Core_Ultra_S3_Retimer23_534530.exe

Installation

  1. Update the BIOS first.
  2. Boot into Windows after BIOS update.
  3. Run the .exe and wait for the firmware update tool to stage the update.

  4. After initialization, the system will restart and update the retimer firmware.

  5. Repeat step 3 after rebooting to update the second set of retimers.

  1. Download the EFI Shell Update v3.04.
  2. Extract contents of zip folder to a FAT32 formatted USB drive. Cleanly unmount the drive before physically removing it, otherwise the BIOS update may not function correctly.
  3. Attach a charger to your device while updating.
  4. Boot your system while pressing F12 and boot from the thumb drive.
  5. Let startup.nsh run automatically.
  6. Follow the instructions to install the update.
  • N/A

Please use the public issue tracker on GitHub to report issues.

If you experience an issue with the update that is related to your system firmware, please post as complete a description as you can, including relevant system information and external peripherals. Please note that we do not currently have a SLA for responding to issues on github, but we will be reviewing them through the bios release process, and will review them for future updates as well.

Please contact support if you have an issue regarding hardware, broken devices, returns, etc.