Framework Laptop 13 13th Gen Intel® Core™ — BIOS 3.05
Downloads
Section titled “Downloads”- Security fix: CVE-2023-28746 — Microcode
- Security fix: CVE-2023-45230 — Dhcp6Dxe
- Security fix: CVE-2023-45232 — DXE memory corruption in IP6Dxe
- Security fix: CVE-2023-45233 — DXE memory corruption in IP6Dxe
- Security fix: CVE-2023-45234 — UefiPxeBcDxe
- Security fix: CVE-2023-39281 — AsfSecureBootDxe
- Security fix: CVE-2023-32282 — Escalation of privilege via local access
- Security fix: CVE-2023-49141 — Microcode
- Implement DTT collaboration gear support for improved battery life during tasks like online video conferencing
- Change power button behavior: holding >4 seconds triggers shutdown, holding >20 seconds triggers EC reset
- Fix issue where laptop cannot power on at high temperatures
- Fix issue where holding the power button down would trigger a battery disconnect
- Set ACPI thermal zone _CRT to 170°C and _HOT to 160°C to fix thermal zones not loading in Linux
Component Versions
Section titled “ Component Versions ”This BIOS update is a bundle of updates to multiple embedded components in the system. Not all of them use the same version number.
| Component | Version | |
|---|---|---|
| EC | a29b80c | Updated |
| PD | 0.1.2C | |
| Intel CSME | 16.1.30.2361v4 | Updated |
| Microcode | 0x4121 | Updated |
Windows Driver Component Versions
Section titled “ Windows Driver Component Versions ”| Driver | Version | |
|---|---|---|
| Intel Chipset | 10.1.19627.8423 | Updated |
| Intel GNA | 03.05.00.1574 | Updated |
| Intel Management Engine | 2351.5.49.0 | Updated |
| Intel Management and Security Status | 2316.5.0.0 | Updated |
| Intel Serial IO | 31.100.2351.81 | Updated |
| Intel Display | 31.0.101.5445 | Updated |
| Intel Dynamic Tuning | 9.0.11404.39881 | Updated |
| Intel TXT Authenticated Code Module | 1.18.16.0 | Updated |
| Intel PROSet WiFi | 23.20.0.4 | Updated |
| Intel PROSet Bluetooth | 23.20.0.3 | Updated |
| Goodix Fingerprint | 3.12804.0.240 | Updated |
| Realtek Ethernet | 11013_20_07272023_08042023 | Updated |
| SD Card Reader | v4_5_10_201 | Updated |
Installation
Section titled “Installation”You can check your current BIOS version following the steps here to determine if you are on the latest release.
Framework firmware is published to LVFS and updates via fwupd, which ships by default on most modern
distributions.
fwupdmgr refresh --forcefwupdmgr get-updatesfwupdmgr updateWindows
Section titled “Windows”- Download the Framework Laptop 13 13th Gen Intel® Core™ BIOS 3.05 Windows Installer.
- Run the
.exeand click "Yes" when prompted to reboot. - Wait for the firmware progress bar to complete — the system will reboot automatically. Do not interrupt.
- Download and install the Windows Driver Bundle v for your system if you are currently using a previous Driver Bundle release, or you are installing the Driver Bundle for the first time.
EFI Shell Update
Section titled “ EFI Shell Update ”- Download the EFI Shell Update v3.05.
- Extract contents of zip folder to a FAT32 formatted USB drive. Cleanly unmount the drive before physically removing it, otherwise the BIOS update may not function correctly.
- Attach a charger to your device while updating.
- Boot your system while pressing F12 and boot from the thumb drive.
- Let startup.nsh run automatically.
- Follow the instructions to install the update.
Known Issues
Section titled “ Known Issues ”- If the system is booted from the off state with a portable monitor attached to the upper left port, the external display may not show any video
- When updating using the EFI update method, the update will fail if the internal SSD is formatted as MBR
Reporting Issues
Section titled “Reporting Issues”Please use the public issue tracker on GitHub to report issues.
If you experience an issue with the update that is related to your system firmware, please post as complete a description as you can, including relevant system information and external peripherals. Please note that we do not currently have a SLA for responding to issues on github, but we will be reviewing them through the bios release process, and will review them for future updates as well.
Please contact support if you have an issue regarding hardware, broken devices, returns, etc.