Skip to content

Framework Laptop 16 AMD Ryzen™ AI 300 Series — BIOS 3.05

File Release Date
Windows BIOS v3.05 Installer 2026-03-26 Framework_Laptop_16_Amd_RyzenAI300_BIOS_3.05.exe SHA256 · 544E020FA79DBEA16142F5AE4B15E7C8490FBEB976E2AA4B9265B8AE1C151B53
Windows Driver Bundle v1.02 2025-12-16 Framework16_AMD_RyzenAI300_drivers_W11_v102_2025_12_16.exe SHA256 · 49C98001FA957F91EBAF916C3099F7387CBED6EEB4CDDC9BC4E9D9F1B5D2EC27
Wi-Fi Driver for use during Windows Installation 2026-06-18 Framework_W11_OOBE_Wifi_Driver_Package.zip SHA256 · 13d7286531f7fc354bf345ea6f465c76cbba79f783a44b45d4803743022b574a
EFI Shell Update (BIOS v3.05) 2026-03-26 Framework_Laptop_16_Amd_RyzenAI300_BIOS_3.05_EFI.zip SHA256 · 5DD2E2F00AA1ED2BCEC77779553C5D4F91D94A47CC7406B11206669E18CE1319
3.05
Released 2026-03-26
Stable
Highlights
  • Updated input module app to 3.15
  • Modified the F2 key in the F12 Boot Menu to go to the setup menu to allow easier navigation to secure boot settings
  • Enhanced the Power On AC behavior, allowing the feature to work correctly without requiring the system to boot into the Operating System at least once for initialization
  • Fixed an issue where the POST memory diagnostic was limited to a maximum of 64GB
  • Fixed an issue where the system was unable to boot from partially locked self-encrypting drives (SEDs)
  • Fixed an issue where the CPU frequency could become locked at 600MHz under energy(battery) saver mode
  • Fixed an issue where text strings were truncated at the bottom of the scroll bar area
  • Security fix: CVE-2025-62626 — Improper handling of insufficient entropy in AMD CPUs could allow a local attacker to influence RDSEED values (CVSS 7.2)
  • Security fix: CVE-2025-54502 — Incorrect use of boot service in AMD APCB SMM driver could allow a privileged local attacker to achieve privilege escalation (CVSS 7.1)
  • Security fix: CVE-20225-54514 — Improper isolation of shared resources could allow a malicious local attacker with high privileges to achieve partial loss of integrity (CVSS 4.8)
  • You can downgrade to a previous BIOS version from 3.05

This BIOS update is a bundle of updates to multiple embedded components in the system. Not all of them use the same version number.

ComponentVersion
ECec_305_178a77d
Updated
PD0.0.22
Updated
NVIDIA® GeForce RTX™ 5070 PD0.0.22
Updated
AMD PIStrixKrackanPI-FP8 1.1.0.2d
Updated
DriverVersion
AMD Chipset Driver7.06.02.123
Updated
AMD Graphics Driver25.10.2 (v32.0.22021.1009)
Updated
NVIDIA Graphic Driver591.44 (v32.0.15.9144)
Updated
NVIDIA App11.0.5.420
Updated
NVIDIA Control Panel8.1.969.0
Updated
Realtek Audio Driver6.0.9859.1
Realtek Audio Console1.53.374.0
RZ717 WiFi Driver5.6.0.4444
RZ717 Bluetooth Driver1.1043.0.555
Goodix Fingerprint Driver3.12804.1.270
AMD DRTM Driver1.0.18.4
Camera Driver10.0.22000.20357
Realtek MEP Opt-in Driver10.0.22000.10003
AMD MEP_ext Driver32.2.0.1
MEP Driver2.0.16
Framework EC0.0.0.6
Realtek Ethernet11013_20_07272023_08042023
SD Card Readerv4_5_10_201
2nd Gen uSD Card Readerv4_5_10_202

You can check your current BIOS version following the steps here to determine if you are on the latest release.

Framework firmware is published to LVFS and updates via fwupd, which ships by default on most modern distributions.

Terminal window
fwupdmgr refresh --force
fwupdmgr get-updates
fwupdmgr update
  1. Download the Framework Laptop 16 AMD Ryzen™ AI 300 Series BIOS 3.05 Windows Installer.
  2. Run the .exe and click "Yes" when prompted to reboot.
  3. Wait for the firmware progress bar to complete — the system will reboot automatically. Do not interrupt.
  4. Download and install the Windows Driver Bundle v1.02 for your system if you are currently using a previous Driver Bundle release, or you are installing the Driver Bundle for the first time.
  1. Download the EFI Shell Update v3.05.
  2. Extract contents of zip folder to a FAT32 formatted USB drive. Cleanly unmount the drive before physically removing it, otherwise the BIOS update may not function correctly.
  3. Attach a charger to your device while updating.
  4. Boot your system while pressing F12 and boot from the thumb drive.
  5. Let startup.nsh run automatically.
  6. Follow the instructions to install the update.
  • Intermittent CPU frequency lock at 600MHz following S3/Modern Standby resume.
  • No sound output through BT devices.

Please use the public issue tracker on GitHub to report issues.

If you experience an issue with the update that is related to your system firmware, please post as complete a description as you can, including relevant system information and external peripherals. Please note that we do not currently have a SLA for responding to issues on github, but we will be reviewing them through the bios release process, and will review them for future updates as well.

Please contact support if you have an issue regarding hardware, broken devices, returns, etc.